টেমপ্লেট:Infobox road/নথি

ব্যবহার

This template generates an infobox for roads, both numbered and unnumbered. Below is the basic syntax that you need to get a complete infobox for an article. Place this below any hatnotes and before any other text and fill in the variables. If a variable is empty, it can and should be omitted. Other, more specific parameters exist and are described in detail below.

Numbered roads

This is the basic code you need to set up an infobox for a numbered route.

{{Infobox road
|country=
|type=
|route=
|map=
|length_mi=
|length_km=
|length_round=
|length_ref=
|established=
|direction_a=
|terminus_a=
|junction=
|direction_b=
|terminus_b=
|previous_type=
|previous_route=
|next_type=
|next_route=
}}

Unnumbered roads

This is the basic code you need to set up an infobox for an unnumbered route.

{{Infobox road
|name=
|marker_image=
|map=
|length_mi=
|length_km=
|length_round=
|length_ref=
|established=
|allocation=
|direction_a=
|terminus_a=
|junction=
|direction_b=
|terminus_b=
}}

Parameters

Numbered roads

These parameters are typically used only for numbered routes.

• country: the ISO 3166-1 alpha-3 code of the country that the route is in. Use this list to find the correct code for the country. These countries have had the necessary subtemplates set up; see that page for instructions on how to set up new countries. If the route is located in Australia, the United States, Canada, or Mexico, and the route is located within one state or province use state (Australia, US, and Mexico) or province (Canada) instead. The "state" and "province" parameters are not interchangeable. Accepted values for these two parameters are as follows:
  • Australian state: the two- or three-letter abbreviation of the state. Note: |country=AUS must also be set if the state is NT or WA to avoid conflicts with other countries.
  • U.S. state: the two-letter postal abbreviation of the state.
  • Canadian province: the two-letter postal abbreviation of the province.
  • Mexican state: the three-letter ISO 3166-2:MX code of the state, minus the "MX-" prefix.
• type: the type of route the article is about. See this page for a list.
• subtype: the type of special route that the article route is, if applicable
• county: the county associated with the route that the article is about. Use only for county routes.
• route: the number of the route.
• section: the section of code that defines this route. Very few areas use this, and the appropriate subpage ([[/law/USA]] for example) must be set up for the parameter to work. The state of Minnesota also uses subsection to specify the exact section of the legal code definition.
• spur_type: defines the type of route that the route is a spur of. Use for spur routes, such as a loop road, bypass, alternate route, business route, truck route, or other type of route. Example: Use WV for West Virginia Route 10 Alternate.
• spur_of: defines what the parent route is, such as Highway 7A's parent is Highway 7, or Interstate 110's parent is Interstate 10. The usual text that would go here is the road number, such as "7" or "10" or "500".
• previous_type: this is the type of route that proceeds the current one in the system. See this page for a list.
• previous_route: the number of the route preceding this one
• previous_dab: any disambiguation needed to generate the correct link to the previous route
• browse_route: the route associated with the current browse row. Typically used only if the browsing route is not the route that the rest of the infobox is about.
• next_type: same as "previous_type" but for the route following this one
• next_route: the number of the route succeeding this one
• next_dab: same as "previous_dab" but for the route following this one
• browse: use to add additional browse lines, which are generated by templates similar to {{ny browse}}. These templates accept the seven parameters given above plus "county"; however, "route" is used instead of "browse_route".

Historical roads

These parameters are typically used only for roads of a historic nature, such as the Silk Road.

• time_period: the time period that the road existed in.
  • established_by: the body that built or established the road. Used only in conjunction with "time_period".
  • significance: the historical/cultural significance of the route. Used only in conjunction with "time_period".
  • related: roads related to the historical road. Used only in conjunction with "time_period".

Route information

• marker_image: shield image to be displayed. Requires full wiki markup. Typically not needed for numbered routes.
• name: road name to be displayed. Typically not needed for numbered routes.
• maint: the agency that maintains the highway. If the appropriate subpage ([[/maint/USA]] for example) exists and a specific jurisdiction is specified (such as "state=AZ"), this parameter will be filled in automatically with that jurisdiction's department of transportation. "maint" still works, however, if the default agency needs to be overwritten, for instance if the route is maintained by another agency.
• alternate_name: Use in situations where the entire route has another name. For example, New York State Route 590 is called the Sea Breeze Expressway for its entire length.
• map: image name of a map for the route, without the File: namespace prefix, which the template will place into an image link for you. For example, map=map_name|map_alt=alt text will render as: [[File:map_name|290x172px|alt=alt text]]. Note: this will pull the file name from Wikidata if left empty and the associated item has the information.
  • map_alt: alt text for the map, for visually impaired readers. See WP:ALT. This parameter should be specified if map is specified.
  • map_notes: an optional parameter with text to display along with the map.
  • map_custom: optionally set to yes if you want to override the template's default image link; then you may specify your own complete image link with: map=[[File:map_name|...]]
  • For best results, your map image width should be 290px.
  • See the WP:USRD maps task force for maps for roads in the United States.
• photo or image: image name of a photo for the route, without the File: namespace prefix, which the template will place into an image link for you. For example, photo=photo_name|photo_alt=alt text will render as: [[File:photo_name|290px|alt=alt text]].
  • photo_alt or image_alt: alt text for the photo, for visually impaired readers. See WP:ALT. This parameter should be specified if photo is specified.
  • photo_notes or image_notes: an optional parameter with text to display along with the photo.
  • This set of parameters will not work for articles in the United States per WP:USRD consensus.
• length_mi or length_km: length of the route in miles (in countries where the imperial system is used) or kilometres (in countries where the metric system is used). Only one can be used in an article. The value from the one defined is the one that appears first. The other is calculated and rounded to the same level of precision as the stated value. If neither "length_mi" nor "length_km" exists, no length is displayed.
  • length_round: number of decimal places to be used in the conversion. If the length should be converted to a greater precision than the given value, adjust length_round to match but be sure to avoid false precision.
  • length_ref, if defined, appears after the first length. Use a citation for the length or {{fact}} here. Be sure that the first length is the one for which you have a reference.
  • length_notes, if defined, appears as a note below the length. This can be used to show former length, or future length, etc.
• established: this is the date the route was commissioned or assigned to its current alignment. (Alternate parameter: formed)
• decommissioned: date the route was decommissioned (Alternate parameter: deleted)
• history: a brief summary of the route's history. Typically used in place of the above two parameters.
• allocation: a list of highway designations allocated to the roadway. For Australia, this uses a label of "Allocation:" while for other countries it will use "Component highways:" instead.
• tourist: a list of the tourist routes that follow the route; currently only set up for use in Australia, New Zealand, Canada, and the US.
• restrictions: a brief mention of any restrictions on the road. Examples include regular seasonal closures or permit requirements needed by motorists.

Major intersections

• beltway_city, orbital, loop, or tloop: for beltways, orbitals, loop roads, or tourist loops only. This is the city that the beltway/orbital/loop encircles. The output differs between the three to accommodate variation in English for different geographic areas. In the case of tourist loops, using |tloop=none will omit a location around which the roadway would loop.
• direction_a: for U.S. roads, this should be either "South" or "West" per the standards set by the U.S. Roads project. For roads in other jurisdictions, consult that area's WikiProject to determine which direction to put here.
• terminus_a or end_a: this is where the route begins and, for U.S. roads, is either at the southern terminus or western terminus
• junction: a list of major junctions. Each WikiProject has different standards for major junctions, so consult the relevant WikiProject for more details.
• direction_b: The opposite of "direction_a"
• terminus_b or end_b: where the route ends, in accordance with the guidelines set forth with terminus_a

This template is capable of creating separate "major intersection" sections for individual segments of a route that is split into two to four segments. The parameters associated with this feature are:

• section#, where # is the number of the segment (1 being the first entered into the infobox, 2 being the next, and so on). By default, the text "Major intersections" is replaced in the header with "Section #"; this parameter allows for a custom header to be used.
• length_mi# or length_km#: "length_mi" or "length_km" for the # segment
  • length_round#: "length_round" for the # segment
  • length_ref#: "length_ref" for the # segment
  • length_notes#: "length_notes" for the # segment
• direction_a: same as described above; however, in this usage it will provide a default direction for the beginning point of all of the segments. If the direction of one endpoint is different, use direction_a# for that endpoint.
• terminus_a# or end_a#: "terminus_a"/"end_a" for the # segment
• junction#: "junction" for the # segment
• direction_b: same as described above; however, in this usage it will provide a default direction for the ending point of all of the segments. If the direction of one endpoint is different, use direction_b# for that endpoint.
• terminus_b# or end_b#: for the # segment

Location

This infobox has several parameters to list locations; however, many are restricted to use in only certain regions or countries for various reasons, including but not limited to local WikiProject consensus and common sense (for example, "countries" shouldn't be used on intra-country articles, and since the only locations with rural municipalities are Manitoba and Saskatchewan, "rural_municipalities" should be used there and nowhere else). Even where usage is possible, each parameter is still optional on an article-by-article basis based on local consensus.

Parameter	Usage	Allowed for
countries	a list of countries that the route enters	EUR, ASIA
regions	a list of regions that the route enters	EUR, ITA, HRV, CZE, CYP, GRC, POL, HUN, SVN, SVK, AUT, TUR, UKR, BIH, SRB, SGP
states	a list of states that the route enters	USA (but not for intrastate articles), IND, DEU
provinces	a list of provinces that the route enters	IRN, TUR, THA
counties	a list of counties that the route enters	no restrictions
parishes	a list of parishes that the route enters	no restrictions, but use only in Louisiana
rural_municipalities	a list of rural municipalities that the route enters	Manitoba, Saskatchewan
municipalities	a list of municipalities that the route enters	no restrictions, but use only in Puerto Rico
districts	a list of districts that the route enters	no restrictions, but use only in Indian states and other locations with districts instead of counties
cities	used to list the cities that the route serves	everywhere but USA per USRD standards
towns	used to list the towns that the route serves	everywhere but USA per USRD standards
villages	used to list the villages that the route serves	everywhere but USA per USRD standards
destinations	used to list the Primary destinations that the route serves	AUS, GBR, IRL, MYS, NZL, IND
lga	used to list the Local Government Areas that the route servers	AUS
locations	used to list the locations that the route serves; label varies based on route type	AUS

Other parameters

• header_type: IBR has a small set of alternate header shades for specific sets of articles. They are:
  • under construction: for roads where construction has begun on the highway and no sections have been opened to traffic. Do not use for roads that are open to traffic in some capacity. (Alternate values: const, uc)
  • historic: for roads of a historic nature, such as auto trails or highways posted with brown, historical or scenic signage. (Alternate values: historical, hist, scenic)
  • former: for highway designations no longer maintained by the corresponding government authority. (Alternate value: decommissioned)
  • freeway: Canada only. For roads that are freeways for their entire length.
  • minor: UK only. For A roads signed with black-on-white markers.
• system: the highway system that the article route is part of. Typically not needed for numbered routes.
• e-road, ahn or tahn: used to indicate that a roadway is part of the International E-road network in Europe, the Asian Highway Network or the Trans-African Highway network.
  • e-road-shield, ahn-shield or tahn-shield: shield or route marker image for the E-road, AHN or TAHN route. Requires full wiki markup.
• embedded: embed another infobox with such capability like {{Designation list}} and {{Infobox NRHP}}.

Technical details

See this page for details on the inner workings of the template.

Example

পথের তথ্য
the New Jersey Turnpike Authority কর্তৃক রক্ষণাবেক্ষণকৃত
দৈর্ঘ্য	১২২.৪০ মা (১৯৬.৯৮ কিমি) ১১.০৩ মা (১৭.৭৫ কিমি) Western Spur ৬.৫৫ মা (১০.৫৪ কিমি) Pennsylvania Extension ৮.১৭ মা (১৩.১ কিমি) Newark Bay Extension
অস্তিত্বকাল	1951–বর্তমান
প্রধান সংযোগস্থল
South প্রান্ত:	I-২৯৫ / US ৪০ in Pennsville
প্রধান সংযোগস্থল	US ৪০ in Carneys Point Township I-95 / Penna. Tpk. in Mansfield Township I-১৯৫ in Robbinsville Township Route ১৮ in East Brunswick I-২৮৭ / Route ৪৪০ in Edison Township G.S. Parkway / US ৯ in Woodbridge Township I-২৭৮ in Linden/Elizabeth I-৭৮ in Newark I-২৮০ in Kearny Route ৪৯৫ in Secaucus
North প্রান্ত:	I-৯৫ / US ১/৯ / US ৪৬ in Fort Lee
মহাসড়ক ব্যবস্থা
New Jersey State Highway Routes আন্তঃরাজ্য মার্কিন যুক্তরাষ্ট্র রাজ্য Scenic Byways
← I-৬৯৫ 700 → I-৮৯৫
টেমপ্লেট:Nj browseটেমপ্লেট:Nj browse

{{Infobox road
|state=NJ
|type=Turnpike
|maint=the New Jersey Turnpike Authority
|length_mi=122.40
|length_round=2
|length_ref=<ref name="sld 0">{{cite web|url=http://www.state.nj.us/transportation/refdata/sldiag/00000700__-.pdf|title=Route 700 Straight Line Diagram|accessdate=2007-04-26|format=PDF|publisher=[[New Jersey Department of Transportation|NJDOT]]}}</ref><ref name="sld 1" /><!--equation is 76.78+52.17-6.55=122.4-->
|length_notes={{convert|11.03|mi|km|2|abbr=on|}} Western Spur<ref name="sld 2">{{cite web|url=http://www.state.nj.us/transportation/refdata/sldiag/00000095W_-.pdf|title=Route 95W Straight Line Diagram|accessdate=2007-04-26|format=PDF|publisher=[[New Jersey Department of Transportation|NJDOT]]}}</ref><br>{{convert|6.55|mi|km|2|abbr=on}} Pennsylvania Extension<ref name="sld 1">{{cite web|url=http://www.state.nj.us/transportation/refdata/sldiag/00000095__-.pdf|title=Route 95 Straight Line Diagram|accessdate=2007-04-26|format=PDF|publisher=[[New Jersey Department of Transportation|NJDOT]]}}</ref><br>{{convert|8.17|mi|km|1|abbr=on}} Newark Bay Extension<ref name="sld 3">{{cite web|url=http://www.state.nj.us/transportation/refdata/sldiag/00000078__-.pdf|title=Route 78 Straight Line Diagram|accessdate=2007-04-26|format=PDF|publisher=[[New Jersey Department of Transportation|NJDOT]]}}</ref>
|established=1951
|direction_a=South
|direction_b=North
|terminus_a={{jct|state=NJ|I|295|US|40}} in [[Pennsville Township, New Jersey|Pennsville]]
|junction={{jct|state=NJ|US|40|nolink=yes}} in [[Carneys Point Township, New Jersey|Carneys Point Township]]<br />[[Image:I-95.svg|20px|link=]][[Image:Pennsylvania Turnpike logo.svg|20px|link=]] [[Interstate 95 (New Jersey)|I-95]] / [[Pennsylvania Turnpike|Penna. Tpk.]] in [[Mansfield Township, Burlington County, New Jersey|Mansfield Township]]<br />{{jct|state=NJ|I|195}} in [[Robbinsville Township, New Jersey|Robbinsville Township]]<br />{{jct|state=NJ|NJ|18}} in [[East Brunswick Township, New Jersey|East Brunswick Township]]<br />{{jct|state=NJ|I|287|NJ|440}} in [[Edison, New Jersey|Edison Township]]<br />{{jct|state=NJ|GSP||US|9}} in [[Woodbridge Township, New Jersey|Woodbridge Township]]<br />{{jct|state=NJ|I|278}} in [[Linden, New Jersey|Linden]]/[[Elizabeth, New Jersey|Elizabeth]]<br />{{jct|state=NJ|I|78}} in [[Newark, New Jersey|Newark]]<br />{{jct|state=NJ|I|280}} in [[Kearny, New Jersey|Kearny]]<br />{{jct|state=NJ|NJ|495}} in [[Secaucus, New Jersey|Secaucus]]
|terminus_b={{jct|state=NJ|I|95|US|1/9|US|46}} in [[Fort Lee, New Jersey|Fort Lee]]
|previous_type=I
|previous_route=695
|browse_route=700
|next_type=I
|next_route=895
|browse={{nj browse
|previous_type=I
|previous_route=95
|route=[[Image:NJ 100 (cutout).svg|20px]]
|next_type=NJ-old
|next_route=101
}}{{nj browse
|previous_type=I
|previous_route=295
|route=[[Image:NJ 300 (cutout).svg|20px]]
|next_type=NJ
|next_route=303
}}
}}

See also

• {{Infobox Australian road}} – A version that adds several additional parameters that are specific for roads in Australia.
• {{infobox road small}} – Compact version of this template, used for special routes that are present on lists or parent route articles.
• {{infobox road junction}} – An infobox for use on articles about road junctions and interchanges.
• {{infobox street}} – An infobox for use on streets.